CBD Cartridge/Disposable - M0002

Ingredients:

  • CBD Extract
  • Propylene Glycol (PG)
  • Vegetable Glycerine (VG)
  • Flavours

Equipment:

  • Glass Beaker
  • Hot plate
  • Stirrer

Method:

NOTE: This must be produced in a well-ventilated area as there is a chance propylene oxide fumes may be made as a by-product

  1. Place a glass beaker onto the scale and measure the amount of CBD extract needed for the batch. Then place the beaker onto the hot plate.
  2. Turn the 'heat' knob on the hot plate. This will cause the hot plate to heat up and begin to melt down the CBD extract.
  3. Once the CBD extract has been melted down, turn off the 'heat' knob. Remove the beaker from the hot plate and place it onto the scale. Now add the amount of PG, VG and flavours needed for the batch (e.g., 5ml,15ml,25ml) into the beaker. 
  4. Once the all the ingredients has been added, mix the contents using the overhead stirrer. This will combine the CBD extract and other ingredients.
  5. When combined, turn off the overhead stirrer and remove the beaker from the stirring place it aside. The batch is now ready to be packaged.