CBD Gummies - M0004

ETHANOL WARNING.

THIS PRODUCT REQUIRES THE USE OF ETHANOL. KEEP AWAY FROM ALL HEAT SOURCES. WIPE  UP ALL SPILLS IMMEDIATELY. APPROPRIATE PPE GEAR MUST BE WORN WHEN PRODUCING THIS PRODUCT. THIS INCLUDES BUT IS NOT LIMITED TO:

  • FUME RESPIRATOR 
  • EYE PROTECTION
  • BODY PROTECTION, E.G., LAB COAT
  • SKIN PROTECTION, E.G., GLOVES (BOTH INNER AND OUTER)

Ingredients:

  • Gummies
  • CBD Extract
  • 70% Diluted Ethanol

Equipment:

  • Scale
  • Hot plate
  • Tumbler
  • Glass Stirrer

Method:

  1. Place the CBD extract into a glass beaker and melt using a hot plate. Once melted remove from the hotplate and place aside. 

    (MAX TEMP FOR METLING CBD 50 DEGREES C)

  2. Dispense the amount of ethanol needed for the order into the beaker with the melted CBD extract. (eg, 10g cbd = 10g ethanol)
  3. Using a glass lab stirrer, mix vigorously until combined. Once combined empty the CBD/ethanol solution into the spray gun's tank.
  4. Place the gummies into the food tumbler. Turn it on and allow for the gummies to spin for 15-20 seconds.
  5. Once the gummies are spinning at an even and consistent speed, take the spray gun and begin spraying the solution into the tumbler. Stop after 2-3 rotations. Allow another 2-3 rotations then spray again. Repeat this process until the spray gun's tank is completely empty.
  6. Once all the solution has been dispensed, allow the gummies to spin for 12-15 minutes to allow for maximum ethanol evaporation.
  7. Once this time has passed, remove the gummies from the tumbler and prepare them for the packaging stage.

 Notes:

- THE SPRAY GUN MUST BE FLUSHED WITH ETHANOL AFTER EVERY USE TO ENSURE IT STAYS CLEAN AND FUNCTIONAL.

- THE TUMBLER MUST BE CLEANED AT THE END OF EVERY DAY WITH BOLING WATER AND DISH SOAP.