CBD E-liquid - M0005

Ingredients:

  • Propylene Glycol (PG)
  • Vegetable Glycerine (VG)
  • CBD Extract
  • Flavours

Equipment:

  • Glass beaker
  • 0.00 accurate scale
  • Overhead Stirrer
  • Hot plate

Method:

  1. Place a beaker on the scale and measure out the amount of CBD extract needed (e.g. 250mg). Then, place it onto the hot plate. Turn the 'heat' knob on.
  2. Once the CBD extract has been melted down, remove the beaker from the hot plate and place it back onto the scale.
  3. Add in the amount of PG required for the order.
  4. Once the correct amount of PG has been added, you can now add flavour concentrates.
  5. Once flavours are measured, mix the contents of the beaker using the overhead stirrer. This will cause the PG, flavour concentrates, and CBD extracts to combine. Leave for 1-2 minutes to allow to combine thoroughly.
  6. Once all components have been combined, add the amount of VG required to the mixture. Once the VG has been added, continue the mixing process (see step 5).
  7. Once all components have been mixed, remove the beaker from stirring and pour the E-Liquid into the appropriate bottle, ready for packaging.

NOTE: When producing CBD e-liquids, it is not possible to make them with a high VG content due to the CBD not properly combining with the VG. It is recommended a 60PG/40VG or 70PG/30VG ratio.